Easycast launder system

The Tralcon Easycast launders are designed to meet the customer's specific needs and wishes. Easycast launders are manufactured from fused silica concrete that has been composed with the greatest possible care.

Easycast launders are superior in areas where precision, durability, and thermal shock resistance are required. In addition, our Easycast launders are highly resistant to aluminum, which benefits the flow and service life.

Our production process:

During our visit, we will identify the current situation and the package of requirements and wishes of you as a customer. We will then inspect the current installation. Based on this information, we will conclude whether an improvement can be realized with the implementation of an Easycast launder system. As the client, you can then decide whether you would like us to place a test part or set-up which we will then carefully monitor.

Thanks to our years of experience in the worldwide aluminum industry, and the already proven results of the Easycast launder system, we think we are more than capable to understand your exact situation and provide you with a possible improvement / solution to your process.

Flexible Connection Part

The Tralcon flexible connection part is supplied as a complete gasket, which can be mounted between the warming furnace and launder system. Together with steel flanges, it is easily applied within your system.

The Tralcon Flexible Connection Part not only saves you a lot of costs but also significantly improves safety when replacing this launder part of the system.

Replacing your conventional connection between the furnace and launder system requires the bolts to be unscrewed, and if necessary, lift the piece out with a crane or small truck.

After installing the new launder, it will take approx. 4 to 6 hours for your system to get ready for production.

In addition, the replaced part will be taken to the workshop where the old refractory part needs to be replaced, this will take approx. 2 to 6 hours, depending on the used refractory material.

Easycast launders are superior in areas where precision, durability, and thermal shock resistance are required.

Launder System

The Tralcon Flexible Connection Part not only significantly reduces your costs, but also improves the overall safety when replacing this launder part of the system.

Easy cast launder system:

The Lamifil project, completed in 2022. The 40 meters of easy cast launder system delivered immediately after the start of production yielded 70% of saved energy. This means a drastic decrease in temperature rsulting in a significant reduction in gas usage.

Tralcon offers strong problem-solving capabilities for the high-temperature and refractory industry.

Our objective is to bring our clients assignment to a good result. Tralcon achieves this in a way that is comfortable for the client. Quality and services are therefore our top priority.

Flexible Connection Part

In order to calculate and set up a fitting proposal, Tralcon needs the following information:

A design or drawing of the furnace spout with angle and front view.
The steel drawing / blueprint of the front view of the launder channel.
The refractory shape includes a radius.
The zero-point angle of the furnace
The maximum tilt angle of the furnace
The flow rate and quality of the casted Aluminum.
Any other photos and images of the system

Flexible Connection Part System

Flexible connection parts are used:

As a flexible seal between the tilting furnace and the wash trough system.
Like a compensator between the launder channels.
As a connection to the caster.

Request a quote

Tralcon offers strong problem-solving capabilities for the high-temperature and refractory industry.

Thank you for your message. We will contact you shortly.

Something went wrong. Please check if you have filled in all fields correctly

Want to collaborate with Tralcon?

Supporting the refractory and high-temperature industry with unparalleled quality in procurement, supervision, and industry-leading services.